Fences Unlimited At The Crystal Coast | 203 Jacob Drive, Morehead City, NC 28557 | (252) 247-6033
Fences Unlimited isn't a company that drove into Garner chasing new-construction growth. We've been headquartered right here on Old Mechanical Court since the 1980s, when Emmett Goodwin Sr. started the business a couple of miles from where our crews load the trucks every morning.
Raleigh doesn't require a permit for every fence, but it does require you to know exactly which fences are exempt — and getting that wrong can mean a stop-work order after the posts are already in the ground.
Fences up to 6 feet in side/rear yards and 4 feet in front yards generally don't need a permit, as long as they stay within setback and sight-triangle rules.
Needed when a fence tops 6 feet, serves as a pool barrier, sits in a Historic Overlay District, or the structure is a retaining wall over 4 feet.
Raleigh requires a site plan showing your fence relative to property lines, easements, and the sight triangle.
Chain-link isn't allowed in front or side-street setbacks outside industrial districts.
We prepare the sight-triangle site plans and HOA spec sheets Raleigh boards ask for.

Raleigh isn't one market — it's a handful of very different ones, and the right fence in one neighborhood is the wrong fence two miles away.
Tree-lined lots with older bungalows mean chain-link is usually off the table, and homes inside a Historic Overlay District need city sign-off on materials. Wood picket and ornamental steel tend to match the streetscape.
Smaller, high-value lots call for privacy screening that doesn't look like a privacy screen — low-maintenance ornamental aluminum or vinyl, plus HOA design review most projects here require.
Lots near Brier Creek Country Club and Umstead State Park often sit on wooded, uneven ground with rockier soil. We adjust post depth and spacing accordingly.
This master-planned community runs its own architectural review, and many homes here have pools — meaning permit-required, code-compliant pool barrier fencing.
Every wood fence uses treated lumber with posts set in concrete, and we'll tell you upfront if a material you're set on won't clear your neighborhood's review board. We work Raleigh-area commercial sites for regional contractors including Bobbitt Design Build, Callahan Construction, and Horne Brothers Construction.
We're not the biggest fencing outfit advertising in Raleigh, and we're fine with that. What we offer instead: work performed and supervised directly by the owners, not subcontracted out; treated wood and concrete-set posts as the standard on every job; and thirty-plus years of references from Triangle homeowners and contractors.
Years serving the Triangle
Work subcontracted out
NC offices, one shop in Garner
Not always. Fences up to 6 feet in side/rear yards and 4 feet in front yards generally don't need one. A permit is required if the fence exceeds 6 feet, serves as a pool barrier, sits in a Historic Overlay District, or is a retaining wall over 4 feet.
It's a clear-visibility zone at intersections and driveways where Raleigh limits fence height and solid materials. Corner lots need a site plan showing the fence relative to property lines and this triangle.
Generally no. Chain-link isn't permitted in front or side-street setbacks outside industrial districts, so we typically recommend wood, ornamental aluminum, or steel for front yards instead.
Yes. Communities like Wakefield, North Hills, and Brier Creek run their own review process, and we provide the material samples, layout, and spec sheets most boards require.
Yes. Pool barrier fencing requires a permit in Raleigh regardless of height, and we build to the self-latching, self-closing, non-climbable standards inspection requires.
Please contact us to request a quote or to discuss your unique project. We look forward to hearing from you. With more than 30 years' experience, references are readily available.